{"id":15708,"date":"2025-01-15T15:46:43","date_gmt":"2025-01-15T12:46:43","guid":{"rendered":"https:\/\/www.ounevaproducts.fi\/?p=15708"},"modified":"2025-08-12T10:55:15","modified_gmt":"2025-08-12T07:55:15","slug":"esittelyssa-pienjannitekaapelijatkokset","status":"publish","type":"post","link":"https:\/\/www.ounevaproducts.fi\/en\/esittelyssa-pienjannitekaapelijatkokset\/","title":{"rendered":"Showcasing low voltage cable joints"},"content":{"rendered":"

Ouneva low voltage cable joints <\/a><\/a>are suitable for extending 4- and 5-conductor cables. Our low voltage cable joints can be used for a maximum operating voltage of 1 kV, for example, with the AXMK cable type.<\/p>\n

As our customer, you benefit most from our ready-to-use kits, especially on large installation sites where cable modifications are frequent. Our joint kits include everything needed to perform easy and efficient jointing work.<\/p>\n

The kits contain, depending on the model:
\n\u2022\tFour or five pre-greased cable joints (Al\/Al or Al\/Cu)
\n\u2022\tA sufficient number of adhesive-lined conductor heat-shrink tubes
\n\u2022\tOne adhesive-lined cable heat-shrink tube
\n\u2022\tSandpaper
\n\u2022\tA cable cleaning wipe<\/p>\n

A special feature of the Al\/Cu joints is the internal divider wall, which allows the connection of conductors made of two different materials using the same connector. The installation, performed with shear head screws, is permanent and reliable.<\/p>\n

The low voltage cable joints are certified and tested connectors manufactured in North Karelia, Finland (EN IEC 61238-1-1:2019, FI-certified connectors).<\/p>\n

Learn more about the products in the video below!<\/p>\n